|
PRODUCTION AND SUPPLY OF MACHINES FOR RECLAMATION, DEGASSING, PURIFICATION AND DRYING OF OILS USED IN ENERGY INDUSTRY
1130 S. Flower St. Suite 406Los Angeles, CA 90015, USAUnited States
Phone: (213) 493-4351Fax: (213) 234-4528sales@globecore.com |
|||||||||||||||||||||||||||||
|
Reclamation, purification, filtration and degassing of energy-related oils product range
|
||||||||||||||||||||||||||||
|
VACUUM OIL FILLING SYSTEM UVD-4M
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); The UVD-4M system consists of: - degassing section; - injection section; - vacuum pump; - control panel. The degassing section is an airtight cylindrical vessel, with airtight oil input opening, two ball valves and vacuum pressure gauge. (-1…0 kg/cm²). The valve is connected to the vacuum pump via collet fitting, flexible hose and a valve. The valve is equipped with a muffler. Injection section is a pneumatic cylinder with piston diameter of 160 mm. The section will take oil from the degassing section and inject it into the transformer’s port. The piston is manually driven by a screw pair. Oil distribution assembly is fitted into the lower part of the cylinder, which consists of pipeline, ball valve and vacuum pressure gauge (-1…0…9 kg/cm²). Vacuum pump (sliding vane rotary pump, mod 50810-235) is designed to create vacuum in the degassing section. The pump is driven by one phase 220 V power supply.
|
|||||||||||||||||||||||||||||
The
vacuum oil filling system is designed for preparation