Reclamation and restoration of transformer, turbine, industrial and motor oils. Sorbent reclamation. Mineral oil reclamation and thermovacuum purification of transformer, turbine and industrial oils. Equipment for high voltage terminal and switch oil fill

oil reclamation, oil purification, oil regeneration, transformer oil purification, turbine oil purification, transformer oil reclamation, turbine oil reclamation, motor oil reclamation, absorbtion oil purification

Reclamation, purification, filtration and degassing of energy-related oils product range


HOME	PRODUCTS	TECHNOLOGY	GALLERY	OIL	CONTACT US

OIL PURIFICATION SYSTEM SMM-2,2S

Oil purification system SMM-2.2S is designed to purify petrochemical fluids (oils, hydrolic fluids, diesel fuel) from solid contaminants with density higher than that for the fluid purified, and water. Viscosity of the fluid must not exceed 300 cSt at 20ºС. If the viscosity of the fluid is 300 cSt, capacity of the system will not exceed 0,6 m³/hour.

The system ensures required degree of fluid purity for manufacturing, maintenance and repair of various energy related equipment, road construction heavy duty machines, motors, manufacturing equipment etc to improve reliability and extend life time of hydro-oil assemblies.

The system can operate in two modes. The first mode is to accumulate solid contaminants and water on centrifuge hull, (with drain of low-adhesion water and contaminants to container during pauses in operation). The second mode is to drain the accumulated water from the centrifuge continuously. Mode of operation is chosen depending on the amount of water and solid contaminants in the liquids and on the duration of the system’s continuous operation.

THIS SYSTEM CANNOT BE USED TO PURIFY FLAMMABLE LIQUIDS WITH FLASHPOINT LESS THAN 65ºС, as well as toxic liquids and liquids aggressive to aluminum alloys, non-corrosion resistant steels and oil-resistant rubber.

Ambient conditions for operation:

- ambient temperature + 10 to + 35°С;

- atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg);

- elevation up to 2000 m;

- fire and explosion proof building.

No	Specification	Value
No	Specification	SMM-2,2S
1	Capacity, m³/hour - viscosity 15±5 cSt - viscosity 50±10 cSt - viscosity 300±50 cSt	2,2 1,2 0,6
2	Centrifuge dehydration rate in one cycle with free water content up to 1%	0,05
3	Contamination containment of the centrifuge in one cycle with contaminant density less than 2,5г/см³, kg - centrifuge rotor - contaminant container	2,0 10,0
4	Oil heater power, kW	29
5	Rated power, kW	34
6	Vacuummetric suction head for fluid input, MPa (kg/cm²)	0,015(0,15)
7	Max operating mode time for purity degree, minutes	30
8	Centrifuge rotor RPM	133±5 (8000±300)
9	Three phase power voltage at 50 HZ, V	380
10	Dimensions, mm: -length -width -height	890 850 1150
11	Weight, kg	350

1130 S. Flower St. Suite 406

Los Angeles, CA 90015, USA

United States

Phone: (213) 493-4351

Fax: (213) 234-4528

sales@globecore.com

GlobeCore USA:

GlobeCore Europe: