|
PRODUCTION AND SUPPLY OF MACHINES FOR RECLAMATION, DEGASSING, PURIFICATION AND DRYING OF OILS USED IN ENERGY INDUSTRY
1130 S. Flower St. Suite 406Los Angeles, CA 90015, USAUnited States
Phone: (213) 493-4351Fax: (213) 234-4528sales@globecore.com |
||||||||||||||||||||||||||
|
Reclamation, purification, filtration and degassing of energy-related oils product range
|
|||||||||||||||||||||||||
|
OIL PURIFICATION SYSTEM SMM-0.6V
This system is explosion proof. Explosion protection class Exd II Ct4. Principles of opeation in filtration and thermovacuum purification mode. The oil enters the unit via the unput pump, mesh filer and filter cartridge and goes to vacuum tank sprayer. Vacuum in the tank is maintained by the vacuum pump and is controlled with the vacuum pressure gauge. Purified air, entering the tank, removes vapor and gasesfrom the surface of the oil drying it. Moinst air is discharged by the vacuum pipe into the atmosphere, after passing through oil separator filter. Purified oil is then directed to clean oil tank. Operation in degassing mode. The oil for processing enters the vacuum tank’s spraye via the pump, mesh filter and cartridge filtter. After that the oil goes into the vacuum tankм. Gases separate from the oil in the sprayer The gases are discharged into the atmosphere. The degassed oil runs through fine filter and non retirn valve an oil output tank.
|
||||||||||||||||||||||||||
The
SMM-0.6V oil purification system is designed for removal of solids and
thermovaccum removal of water and ases from lubricating and electric
insuation oils, with viscosity up to 70 cSt.